BUTTON FRAME UI ASSEMBLY
Replaces GE Healthcare GA200270BUTTON FRAME UI ASSEMBLY
Part #GA200270
The Button Frame - UI Assembly has front view and rear view. The key assembly will be mounted on the left side of the user interface. If the key assembly is to be mounted at the right side of the user interface, then the XY break key button has to be rotated 180 degrees to give the correct orientation of the key symbol. Front view and rear view are the two separable parts, which can be fixed together. The front view has two key buttons attached to it, namely the XY break button and Z-Lift button. The buttons are set into the bracket buttons to achieve a proper sliding fit. The rear view has an up/down button board which allows the buttons to move up and down, once both the views are attached. All three buttons have a 1.5mm general wall thickness. Both the buttons have lock logo and arrow logo embossed to them each. It is made from a material which features high flow ability, good stiffness and high gloss. They are used in Vivid E90 and other applications.
The Button Frame - UI Assembly has front view and rear view. The key assembly will be mounted on the left side of the user interface. If the key assembly is to be mounted at the right side of the user interface, then the XY break key button has to be rotated 180 degrees to give the correct orientation of the key symbol. Front view and rear view are the two separable parts, which can be fixed together. The front view has two key buttons attached to it, namely the XY break button and Z-Lift button. The buttons are set into the bracket buttons to achieve a proper sliding fit. The rear view has an up/down button board which allows the buttons to move up and down, once both the views are attached. All three buttons have a 1.5mm general wall thickness. Both the buttons have lock logo and arrow logo embossed to them each. It is made from a material which features high flow ability, good stiffness and high gloss. They are used in Vivid E90 and other applications.
- GE Healthcare
- VIVID E9
- VIVID E9
The Button Frame - UI Assembly has front view and rear view. The key assembly will be mounted on the left side of the user interface. If the key assembly is to be mounted at the right side of the user interface, then the XY break key button has to be rotated 180 degrees to give the correct orientation of the key symbol. Front view and rear view are the two separable parts, which can be fixed together. The front view has two key buttons attached to it, namely the XY break button and Z-Lift button. The buttons are set into the bracket buttons to achieve a proper sliding fit. The rear view has an up/down button board which allows the buttons to move up and down, once both the views are attached. All three buttons have a 1.5mm general wall thickness. Both the buttons have lock logo and arrow logo embossed to them each. It is made from a material which features high flow ability, good stiffness and high gloss. They are used in Vivid E90 and other applications.
The Button Frame - UI Assembly has front view and rear view. The key assembly will be mounted on the left side of the user interface. If the key assembly is to be mounted at the right side of the user interface, then the XY break key button has to be rotated 180 degrees to give the correct orientation of the key symbol. Front view and rear view are the two separable parts, which can be fixed together. The front view has two key buttons attached to it, namely the XY break button and Z-Lift button. The buttons are set into the bracket buttons to achieve a proper sliding fit. The rear view has an up/down button board which allows the buttons to move up and down, once both the views are attached. All three buttons have a 1.5mm general wall thickness. Both the buttons have lock logo and arrow logo embossed to them each. It is made from a material which features high flow ability, good stiffness and high gloss. They are used in Vivid E90 and other applications.
- GE Healthcare
- VIVID E9
- VIVID E9
The Button Frame - UI Assembly has front view and rear view. The key assembly will be mounted on the left side of the user interface. If the key assembly is to be mounted at the right side of the user interface, then the XY break key button has to be rotated 180 degrees to give the correct orientation of the key symbol. Front view and rear view are the two separable parts, which can be fixed together. The front view has two key buttons attached to it, namely the XY break button and Z-Lift button. The buttons are set into the bracket buttons to achieve a proper sliding fit. The rear view has an up/down button board which allows the buttons to move up and down, once both the views are attached. All three buttons have a 1.5mm general wall thickness. Both the buttons have lock logo and arrow logo embossed to them each. It is made from a material which features high flow ability, good stiffness and high gloss. They are used in Vivid E90 and other applications.
The Button Frame - UI Assembly has front view and rear view. The key assembly will be mounted on the left side of the user interface. If the key assembly is to be mounted at the right side of the user interface, then the XY break key button has to be rotated 180 degrees to give the correct orientation of the key symbol. Front view and rear view are the two separable parts, which can be fixed together. The front view has two key buttons attached to it, namely the XY break button and Z-Lift button. The buttons are set into the bracket buttons to achieve a proper sliding fit. The rear view has an up/down button board which allows the buttons to move up and down, once both the views are attached. All three buttons have a 1.5mm general wall thickness. Both the buttons have lock logo and arrow logo embossed to them each. It is made from a material which features high flow ability, good stiffness and high gloss. They are used in Vivid E90 and other applications.
- GE Healthcare
- VIVID E9
- VIVID E9